Products

Chontan is a professional manufacturers and suppliers in China. Our factory provides lifting anchor system, fixing socket, coil and ferrule loop insert, etc. Extreme design, quality raw materials, high performance and competitive price are what every customer wants, and that's also what we can offer you. We take high quality, reasonable price and perfect service.

Heavy Duty Foot Anchor Socket

Introducing Chontan's Heavy Duty Foot Anchor Socket, an essential component for securing structures in demanding environments. As a leading manufacturer and supplier, Chontan's factory is dedicated to producing high-quality anchor sockets designed to withstand heavy loads and harsh conditions.

Lifting Insert

Lifting Insert is a M threaded insert used for lifting. It can be used to move beams, panels, and slabs, among other things. To transfer the load into the concrete, a rebar must be passed through the cross hole.

Straight Rebar Anchor

The Chontan straight rebar anchor supplied by China is designed for use in very thin walls，in the webs of reinforced concrete girders or precast garages. The anchor uses the same formers and lifting clutches as the normal lifting pin anchors while yet maintaining the same head size. The anchor may also be used to lift prefabricated masonry panels.

Spherical-Head Tilt-Up Anchor

The Chontan Spherical-Head Tilt-Up Anchor from the Chinese manufacturer also named as Pitching Anchor. It's used for erection and transport of thin precast concrete elements, such as walls/beams. This anchor should be cast in the concrete by a special recess former but using the same lifting clutch as lifting anchor.

Rubber Recess Former with fittings

The Chontan Rubber Recess Former with fittings supplied by China can be used several times. Lifting Anchors are placed in the proper positions, and a clutch recess is created using a rubber recess former. The Fixing Plate is finished with external metric screw thread and wing nut. To secure it to the formwork, it is put in the rubber former.

Plate Anchor

The Chontan plate anchor made in China is recommended for all large thin reinforced slabs, which are to be lifted at right angles, and where the standard lifting anchors will not fit in the slab. They are also used for demolding panels. The anchor can also be used in elements when the standard short spherical head anchor does not provide sufficient anchorage.

Off-Set Lifting Anchor

The Chontan Off-set Lifting Anchor supplied by China is named as curved lifting anchor in some areas. This anchor, which is made to lift very shallow slab units, transfers loads into the surrounding concrete using four additional reinforcement bars that are arranged in pairs over the integral plate. Mild steel and a hot-dip galvanized finish are options.

Double Head With or Without Magnet Recess Former With Rubber Grommet

Chontan Double Head With or Without Magnet Recess Former With Rubber Grommet supplied by China, which are employed in steel molds similarly to steel formers and are attached to the formwork by magnetic adhesion, are used to form steel. where durability is an issue, used in place of rubber formers. To attach the ball-headed anchor to the magnet, the appropriate rubber holding band is supplied in each case.

<...6 7 8 9 10...15 >