China Lifting Anchor System Manufacturers, Suppliers, Factory

The lifting anchor system is a high-quality and cost-effective device for lifting all types of precast concrete elements up to 45 tons. A number of anchors and accessories are available, allowing for a variety of lifting applications. Typically used for lifting and handling a wide variety of precast elements such as Underground Utility Structures, Box & 3-Sided Culverts, Curb Inlets & Catch Basins, and Manholes. Other popular applications include precast wall panel stripping, deck slabs, and highway barrier handling.

Lifting Clutch

For use with lifting anchors and accessories, Chontan lifting clutches from China have been specifically created and authorized. Given that they are correctly connected to the head of the appropriate anchor in the recess, the lifting clutches are not intended to spontaneously disengage when the system is loaded and in any configuration.

Lifting Anchors

The Chontan lifting anchors from the Chinese manufacturer are made of round steel rods with forged feet and heads. It is suitable for the transportation of walls, pipes and floors. The anchorage height can be modified according to the intended use, making it the best choice for safe, application-specific load applications.

Lifting Eye Anchor

The Chontan Lifting Eye Anchor from China have enlarged heads designed to mate with lifting clutches. It was created for situations where it’s impossible to use conventional lifting anchor bases to transfer forces to the surrounding concrete. When used in combination with a reinforced anchor tail, lifting loads can be transferred deep into the concrete member.

Straight Rebar Anchor

The Chontan straight rebar anchor supplied by China is designed for use in very thin walls，in the webs of reinforced concrete girders or precast garages. The anchor uses the same formers and lifting clutches as the normal lifting pin anchors while yet maintaining the same head size. The anchor may also be used to lift prefabricated masonry panels.

Spherical-Head Tilt-Up Anchor

The Chontan Spherical-Head Tilt-Up Anchor from the Chinese manufacturer also named as Pitching Anchor. It's used for erection and transport of thin precast concrete elements, such as walls/beams. This anchor should be cast in the concrete by a special recess former but using the same lifting clutch as lifting anchor.

Rubber Recess Former with fittings

The Chontan Rubber Recess Former with fittings supplied by China can be used several times. Lifting Anchors are placed in the proper positions, and a clutch recess is created using a rubber recess former. The Fixing Plate is finished with external metric screw thread and wing nut. To secure it to the formwork, it is put in the rubber former.

Plate Anchor

The Chontan plate anchor made in China is recommended for all large thin reinforced slabs, which are to be lifted at right angles, and where the standard lifting anchors will not fit in the slab. They are also used for demolding panels. The anchor can also be used in elements when the standard short spherical head anchor does not provide sufficient anchorage.

Off-Set Lifting Anchor

The Chontan Off-set Lifting Anchor supplied by China is named as curved lifting anchor in some areas. This anchor, which is made to lift very shallow slab units, transfers loads into the surrounding concrete using four additional reinforcement bars that are arranged in pairs over the integral plate. Mild steel and a hot-dip galvanized finish are options.

<1 2 >

As one of the professional China Lifting Anchor System manufacturers and suppliers, we have own factory. You may need some customized services to meet the actual needs of your region, or you want to wholesale advanced products, you can leave us a message through the contact information on the webpage. If you want to buy cheap Lifting Anchor System, contact us for price list. Let us cooperate with each other to create a better future and mutual benefit.