China Sandwich Panel Anchor System Manufacturers, Suppliers, Factory

The Sandwich Panel Anchor System connects the internal and external concrete skins of precast sandwich panels while allowing for minimum thermal transmission over the insulated joint. The system is made up of flat and cylinder anchors that are anchored into the concrete with anchoring pins. The Cylinder Anchor's design allows it to be used as a bearing anchor and safely and evenly transfer forces in all directions, even when the wall elements are rotated during production and construction.

The fiberglass connector pin is made of high performance, continuous glass-fiber reinforced polymer and is robust, durable, and thermally insulating. It is intended to be used in place of conventional heat-conductive metallic connection products.

Spcpl Sandwich Wall Fiberglass Connect Pin

Spcpl Sandwich Wall Fiberglass Connect Pin is used in precast concrete sandwich panel system, which maximises thermal efficiency by insulation with high thermal mass properties of concrete. SWFCP locks the insulation layer between the internal structural concrete layer and the external concrete layer wythe. They are made from pultruded epoxy back-boned resin for maximised corrosion resistance and inter laminar shear strength.

Sandwich Sleeve Anchor Cylinder Anchor

Cylinder anchor/ Sandwich sleeve anchor /Sandwich Sleeve Anchor Cylinder Anchor To join the face and load-bearing layers of concrete sandwich pieces. As a bearing anchor for transferring the facing layer's dead weight to the load bearing layer; Because of the circular shape, even when the wall elements are rotated, forces are distributed evenly in all directions.

Sandwich Panel Flat Anchor

Sandwich Panel Flat Anchor can be used for three or four-layer slabs. They can be used for three or four-layer slabs. They can be used as a tension anchor in conjunction with the Sleeve Anchor or as a basic support anchor in pairs with symmetrical installation in construction components. The flat anchor can only be installed with Connector Pins.

Pin Anchor

Pin Anchors made of high-quality, stainless steel are used as shear connectors in the sanwich anchor system. Anchor pins are usually distributed in an even grid over the entire area of the sandwich panel. Connector pins are usually distributed in an even pattern over the entire area of the sandwich panel.

Clip On Stirrup

Clip On Stirrups made of high-quality, stainless steel are used as shear connectors in the sanwich anchor system. Anchor pins are usually distributed in an even grid over the entire area of the sandwich panel. Connector pins are usually distributed in an even pattern over the entire area of the sandwich panel.

Clip On Pin

Clip On Pins made of high-quality, stainless steel are used as shear connectors in the sanwich anchor system. Anchor pins are usually distributed in an even grid over the entire area of the sandwich panel. Connector pins are usually distributed in an even pattern over the entire area of the sandwich panel.

<1 >

As one of the professional China Sandwich Panel Anchor System manufacturers and suppliers, we have own factory. You may need some customized services to meet the actual needs of your region, or you want to wholesale advanced products, you can leave us a message through the contact information on the webpage. If you want to buy cheap Sandwich Panel Anchor System, contact us for price list. Let us cooperate with each other to create a better future and mutual benefit.