Straight Type Erection Anchor
Chontan straight type erection anchor from China is designed for lifting and transporting thin-walled precast pieces from horizontal to vertical edges. It features a "split-foot" design that disperses applied loads and improves pullout capability.
Send Inquiry
Product Description
Description of straight type erection anchor
Chontan straight type erection anchor is designed for edge lifting to vertical and shear rotation in thin walled concrete elements. Safe working loads can be achieved while edge lifting thin wall panels with low psi concrete by utilizing a shear bar. The convex side of the anchor provides proper placement of the shear bar.
We have a full line of alp erection anchors, contact us for the latest technical information
-
Two Hole Anchor
-
Erection Anchor
-
Spread Anchor
-
Unilateral Erection Anchor
-
Spread Anchor
-
Sandwich panel Anchor
-
Plate Ring Anchor
-
Tech Erection Anchor
-
Tech Erection Anchor with
Shear plate
-
Insulated panel anchor
-
Insulated panel anchor with Shear plate
-
Forged Insulated panel anchor
-
Erection head anchor
-
Erection head anchor with Shear plate
-
Ring Lift Uni-Anchor
-
Forged erection anchor
-
Forged erection anchor with shear plate
-
Drop Forged Foot Anchor
-
Forged Foot Erection Anchor
-
Split foot erection anchor
Specification of straight type erection anchor
|
Load Grou |
Clutch |
Code |
L |
W |
T |
SWL |
|
(in.) |
(in.) |
(in.) |
(lbs) |
|||
|
2T |
2-3T |
R08-020A |
4-1/4" |
2" |
3/8" |
4,000 |
|
2T |
2-3T |
R08-020B |
7-7/8" |
2" |
3/8" |
4,000 |
|
4T |
4-6T |
R08-040A |
7-7/16" |
2-1/2" |
5/8" |
8,000 |
|
4T |
4-6T |
R08-040B |
10-1/2" |
2-1/2" |
5/8" |
8,000 |
|
8T |
8-12T |
R08-080A |
13-1/4" |
3-3/4" |
3/4" |
16,000 |
* Safety Factor is 4:1.
* Stainless Steel 304 (A2)/316(A4) are available according to the request.
* Surface Black(B) /Zinc Plate (Z.P) / Hot Dipping Galvanizing (H.D.G) are available.
Application of straight type erection anchor:
For horizontal to vertical edge lifts and the shear rotation of thin-walled units.
· Specially designed head provides added protection against spalling
· For lifts applying shear and tension to the anchor
· Specially designed body allows for all reinforcement
· Based on a 4:1 safety factor Superior Design Two steel protrusions or "ears" on the head of the anchor provides added protection against spalling. These ears hug either side of the ring clutch, restricting its rotation during lateral pulls. As a result, lateral forces are transmitted directly to the edges of the anchor instead of the concrete.
straight type erection anchor Display:
Factory:
Package of straight type erection anchor
For small size, pack it in bags first, and then pack it in plywood box, and for big size, pack it in plywood box directly.
Test of straight type erection anchor
We do tensile testing as a QCM during the production process, perform dimensional inspection, tensile testing before to shipment, and issue EATHU reports for clients. All production processes are carried out in line with ISO9001 standards.
Certification of straight type erection anchor:
